spe - 12 - 8 - 138/a/wy page 1 of 3 specification part no. : pcb.mmcxfstj. ht product name : mmcx (f) jack C vertical pcb thru hole jack feature : mmcx (f) jack vertical pcb thru hole jack frequency range: dc up to 6 ghz finish: gold leg length: 3.0 mm total length: 7.5 mm rohs compliant
spe - 12 - 8 - 138/a/wy page 2 of 3 1. introduction the pcb.mmcxfstj. ht connector was designed to be mounted on a pcb . t he maximum thickness of pcb that the connector can be used with is 0.8mm. the con nector pin is directly soldered on to pads on the pcb . the connector is a stand ard m mcx (f) jack . taoglas connectors are all rohs compliant. 2. specification electrical impedance 50? frequency range dc ~ 6 ghz working voltage max. 170 v rms dielectric withstanding voltage 500 vrms insulation resistance 1 00 0 m m? mechanical connector d imension 7.5mm* ? 3.5mm max. thickness pcb acceptable 0.8 mm connector pin diameter 0.7 mm c onnector type mmcx(f) vertical pcb thru hole jack environmental rohs compliant
spe - 12 - 8 - 138/a/wy page 3 of 3 3. connector drawing name material finish qty 1 body phosphor bron ze gold 1 2 insulator teflon white 1 3 female contact phosphor bronze gold 1 taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descr iptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third p arties without express permission is strictly prohibited. copyright ? 2012, taoglas ltd.
|
